Leaky Pipes and Carpet Damage

leaky pipes lead to floor and carpet damage

Leaky pipes are one of the many things that homeowners may face on a regular basis. However, an increase in the bill charged for this utility may not be the only one that you may be facing. If you have carpet installed all over your house and have water leak happening somewhere, there is a huge possibility of carpet damage due to this leakage.


Leaking Pipes

The first thing that you want to do is check where the leakage is coming from. There is no point cleaning and drying up your carpet if the water leakage is not addressed because you will end up doing the same process. Thus, it is important that you do this process first thing.

Locating where the leak is coming from should not be that difficult. The water stain on your carpet should tell you where the leak should be coming from. It could be directly above the carpet or below it. However, there are instances where the leakage is a distance away from where the carpet damage is. This happens when the pipe is on an inclined and the water is dripping from the higher point to a lower point. If this is the case, you must be patient in locating the source of the leak.

Once the leak is located, you now have to work on how to fix it. There are several things that you can use to have this fixed. You can either use a clamp with a sheet of rubber to stop the leak. This fix can help stop your leakage for months. However, in the absence of C-clamps or a sleeve clamp or an adjustable hose clamp, you can always use an epoxy putty. When using this, make sure that the area is dry for the epoxy to adhere and work. In the occasion that these two suggested fixes are not available, you can also try stopping the leak with the use of a pencil point.


Damaged Carpet

Now that the leak has been patched, it is now time for you to assess the damage caused on your carpet. It is very important that you address the leakage as soon as it is detected to prevent any mold or mildew from appearing on your carpet. The formation of mold and mildew on your carpet is a big no-no because of the different health-risk factors that they impose. With the presence of black mold, you are at risk of having frequent respiratory infections or asthma attack. You may also suffer from fatigue and depression because of this. In other times, your ability to concentrate will also be affected. Thus, it is a must that you dry your wet carpet as soon as possible.

There is a time frame of 48 hours for you to make your carpet dry. If your carpet has been wet for over two days, there is a high possibility of mold build-up already happening on your carpet. With this in mind, you may have to do more than just drying up your carpet. On the one hand, if you were able to detect the leak earlier and your carpet is not wet for more than two days, then you can simply have your carpet dried using dehumidification equipment together with a water extraction equipment. The two equipment will help remove moisture from your carpet making it free from any mold formation. The good thing is, if you don’t have these instruments at hand, you can easily rent one out.

Once the carpet is dry, you can thoroughly clean it with a HEPA vacuum. This will ensure that no mold spore and bacteria is left on your carpet. However, if the problem is more than what you can handle, you can always ask the help of experts who are surely capable of giving your carpet a thorough cleaning. Professionals also have the expertise on how to properly handle a carpet with molds and mildew and should know what cleaning process is best suited for the type of carpet that you have.

For carpet that is seriously damaged and in need of repair, leave it to the hands of the expert rug cleaners. Visit Silver Rug Cleaning.

Comments are closed.